Principle Dimensions and Information

Designer: C&C Design

Builder: C&C Yachts

Year Built: 1977

Hull Type: Fin keel with transom hung rudder

LOA: 24.00’

LWL: 19.50’

Beam: 8.81’

Draft: 4.00’

Ballast: 1,050 lbs. (lead)

Displacement: 3,200 lbs.

Rig Type: Masthead sloop

Sail Area: 252 sq. ft.

Auxiliary Propulsion: 9.9 Mariner outboard motor

Fuel Capacity: 3 Gallons

Freshwater Capacity: 6 Gallons

Hull and Deck Construction

Fin keel with transom hung rudder configuration

FRP hull construction

Lead ballast keel with stainless steel keel bolts

Molded FRP deck, cabin and cockpit thru-bolted and bedded to hull flange.

Marine plywood full and partial bulkheads bonded to hull interior

Deck Hardware and Features

Stainless steel bow pulpit

Stainless Steel stern pulpit

Stainless steel stanchions with vinyl coated lifelines

Anodized aluminum (Black) toe rails

Stainless steel stem-fitting, chain plates and backstay attachments

Stainless steel anchor chain deck pipe

Cast aluminum bow and stern chocks and cleats

Fore deck opening hatch

Fixed portlights on cabin sides

Mast step on cabin top

Teak handrails port and starboard on cabin top

Teak taff rail

Sliding FRP companionway hatch

Self-bailing cockpit

Sail lockers port and starboard in cockpit

Interior Arrangement and Features

Molded FRP interior fabrication bonded to interior hull sides

Furthest forward is accessible anchor chain / rode locker.

Next aft is sleeping space for two (2) persons in a fixed V-Berth configuration with storage areas below.

Forward sleeping area separated from main saloon by partial bulkheads (port and starboard) and removable seat back.

Main saloon area aft of sleeping area.

Settee seating / berths port and starboard with additional athwartships seating cushion and seat back dividing the forward sleeping area from the main saloon and creating a U-shaped seating area around the cabin table mounted on mast step compression post. Storage spaces below settees and athwartships seating. Additional storage space on shelves located above and outboard of settees

A partial bulkhead separates the starboard settee from the galley area (aft)

Aft of the partial bulkhead  is a galley and storage area with stainless steel sink basin and bracket for mounting a gimbaled single burner stove.

A full height bulkhead with Teak book rack separates the port settee from the head area (aft)

In the head area there is a cushioned seat box which folds up and secures out of the way for use of a Porta-pottie hidden under the seat.

An additional Teak book rack is located at the aft end of the head area.

Cabin sole is Teak and Holly plywood

Interior Lighting and Ventilation

Natural lighting and ventilation from forward opening hatch and sliding companionway hatch.

Natural light from fixed ports in cabin sides.

Electrical lighting from four (4) reading lights located in forward sleeping cabin (1), main saloon (2),galley area (1) and additional lighting provided by overhead fluorescent fixture on main cabin overhead above table.

Spars and Rigging

Deck-stepped mast with interior compression post below-decks

Masthead sloop rig configuration

Single-spreader aluminum mast

Aluminum boom

Aluminum spinnaker pole

1x19 Stainless steel wire standing rigging (shrouds and stays) with Bronze turnbuckle adjusters.

Sail Trim and Sail Handling Equipment

Sail tracks with adjustable cars port and starboard on side decks and cabin top.

Short sail track running fore and aft at bow

Mast step with halyard turning blocks on cabin top.

Turning blocks, fairleads, winches and cleats for halyards and sail control lines port and starboard on cabin top.

Winches and cleats for headsail and spinnaker sheets port and starboard on cockpit coamings

Primary Winches: Two-speed / Barient #18. port and starboard on cockpit coaming aft

Secondary Winches: Single-speed / Barient #10, port and starboard on cockpit coaming forward

Halyard Winches: Single-speed / Barient #10, port and starboard on cabin top aft

Rope tackle boom vang

Main sheet traveler in cockpit forward

Harken roller-furling head stay

Masthead fly / Windex wind indicator

Winch handle holders in cockpit (2ea)

Winch handles (2ea)

Sails and Canvas

Marblehead Sailmakers mainsail

North Sails mainsail

Marblehead Sailmakers #1 Genoa (roller-furling)

Hood Sailmakers Genoa (roller-furling)

Sobstad spinnaker

Mainsail cover (Bimini Blue)

Interior cushions

Electronics and Navigational Equipment

Plastimo bulkhead-mounted helm compass

Garmin Echomap 54dv GPS chart plotter with swivel mount at companionway

Icom IC-M415S VHF radio

Autohelm Tridata

Kenyon knot meter

Auxiliary Propulsion and Fuel Systems

Mariner 9.9 outboard motor with electric start on adjustable (up / down) outboard motor bracket

Four (4) gallon poly fuel (gas) tank and house

Electrical Systems

12 Volt DC ship’s systems

Single 12-Volt marine battery with battery box.

Rotary style master battery switch.

Circuit panel for individual control of ship’s electrical functions

Freshwater Plumbing and Sanitation Systems

Six (6) gallon freshwater tank

Manual (hand) pump at galley sink basin.

Stainless steel sink basin in galley

Porta-pottie toilet

Ground Tackle

Anchor storage bracket on bow rail

Stainless steel anchor chain pipe

Danforth anchor with appropriate chain and rode

Dewatering Equipment

Whale Gusher manual bilge pump

Safety Equipment

Type II PFD’s (2ea)

Flares

Fire extinguisher

Navigational lighting

Additional Equipment

Dock lines and fenders

Boarding / swim ladder

Folding stern step

Disclaimer

Brooklin Boat Yard offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.