1984 Buddy Davis 50'
15.24 m1984 Buddy Davis
50' (15.24 m) Custom Carolina
Very cool opportunity to own a jig built Buddy Davis with a recent repower and major refit.
$ 699,500 USD
€ 664,359 Euros
$ 991,380 CAD
£ 547,546 GBP
Description
Very cool opportunity to own a jig built Buddy Davis with a recent repower and major refit. From late '21 into '22 Full Circle underwent a major overhaul back home in Wanchese and she turned out really nice. With 300 hrs on new CATs, extended warranty, beautiful interior carpentry, new topside paint, hardtop, riggers, curtains, electronics, Optimus steering and a very long list of other additions and upgrades, Full Circle is definitely worth considering if you are in the market for a boat in this class. Come check her out.
LOA50'
LOA15.24''
Beam15'
Beam Inch6''
Fuel Tank (Gallons)800
Fuel Tank (Liters)3028.33
Fresh Water (Gallons)125
Fresh Water (Liters)473.18
TypePower
ConditionUsed
Specifications
Power-Used
1984
15'6"
2
1
34 Knots
27 Knots
Diesel
Wood
800 Gallons (3028.33 Liters)
125 Gallons (473.18 Liters)
35000
Engines
Engine 1
- Engine Make: Caterpillar
- ModelEngine Model: C12.9
- Engine TypeEngine Type: Inboard
- Power HPPower HP: 830.00
- Power KWPower KW: 618.93
- Feul TypeFeul Type: Diesel
- HoursHours: 300.00
Engine 2
- Engine Make: Caterpillar
- ModelEngine Model: C12.9
- Engine TypeEngine Type: Inboard
- Power HPPower HP: 830.00
- Power KWPower KW: 618.93
- Feul TypeFeul Type: Diesel
- HoursHours: 300.00
Full Details
Recent Upgrades / 2021-2022
TOTAL REPOWER AND REFIT 2021/2022 / EXTENDED WARRANTY
Engine room was gutted, stringers and engine beds removed from bulkhead to bulkhead. Replaced with layers of marine fir, glassed and laminated together with inlaid G10 material tapped for mounts and covered with aluminum stringer caps. New fresh water tank installed at forward bulkhead and wall to wall pump shelf built around it with integral battery boxes. Walls, floors and bilge sanded and painted with new aluminum angle ledger and center walk boards added between engines. Ceiling covered with sound down and perforated aluminum panels. Other items performed or added during this project include:
Pair of CAT C-12.9 830 hp engines with ZF 400A 1.59/1 transmissions, risers, surge tubes (300 hrs)
ZF CruiseCommand electronic controls
Optimus steering system (2024)
Glide dripless shaft seal system
Bilge pumps throughout / 2 at each station
Seacocks for RW mains
Hoses and plumbing in ER
Battery system replaced, rewired, in line breakers
LED lighting throughout boat
Charles 40A Battery charger
Stingray FW pump
Topside paint, cockpit, bridge, house and cockpit
Hardtop Frame with tower style ladder legs to coverboards and Hardtop
VHF antennas
5 panel curtain enclosure
Bridge cushions
Soft stretched headliner and wall paper throughout boat to accentuate the solid teak trim and veneer borders
New light switches throughout boat with select dimmers
Interior / Soft Goods done by Crystal Coast Interiors
Window tinting
Fridge and Freezer drawers added
Large Cabinet dedicated to pull out trash receptacle
Riggers with beefed up backbars and quick disconnects
Electronics Console redo and new electronics and bridge lighting, separate lift top box in console with rocker switches for Ignitions, Controls, Low Idle, ZF display, VHF radios and Optimus steering display
Bluewater teak ladder back helm chair and extra buddy chair mounting pad
Airmar 275 Chirp transducer
Cockpit boxes redone, bait box and drink box added, beefed up with insulation and painted with raptor liner inside
Second remote station added in stbd box with stowable electronic controls and long cables for access from cockpit station
Gaff lockers added with(2) 50A service receptacles, gaff and brush holders, RW/FW access, quick connect tank fill
12V dredge reel receptacles as well as 12V bottom reel receptacles
Hawse pipes, cleats and rodholders
Bluewater 130lb fighting chair with painted seat, padded teak armrests and footrest, teak rocket launcher with 4 rod holders, storage drawer and cup holders
Cutless bearings
2 sets of wheels tuned by Wildcat Propeller
Interior and Layout
Enter the salon through split open-out teak doors on centerline to teak and holly landing. L shaped couch to port that meets a large galley countertop. To Starboard is a 6' couch that meets another large coutertop running into the dash. Forward galley to port with teak and holly sole, large 2 door fridge / storage, sink, drawer and cabinet storage, under sink storage and plenty deep storage above the counter in several cabinets with rollback doors.
Many teak features and accents throughout the boat, trim, doors, cabinetry, drawer faces, valances, etc.
Microwave, TV, Trash receptacle cabinet, Fridge / Freezer drawers
Custom Textured wallpaper throughout
Soft stretched headliner with recessed lights and speakers
ER access at salon door entry
Custom Interior design and soft goods by Crystal Coast Marine Interiors
Tinted windows
Carpet throughout
Starboard companionway high bunk forward of steps with huge storage cabinet and drawers beneath
Master to Port with private lockable head access door, double bed, mirrored walls, hanging locker, nightstand countertop, drawer and cabinet storage, overhead and reading lights
Companionway door also to head with teak and holly sole, solid surface countertop, custom sink and fixtures, full shower, Raritan Atlantes marine head, mirrored medicine cabinet, storage cabinet below sink and vanity as well as below steps
More hanging locker, drawer and cabinet storage in companionway
Forward V berth with stacked bunks to starboard, overhead outboard storage cabinets, hanging locker, storage drawers and cabinets below bunks as well as port side countertop
Overhead bow hatch
In floor rod storage set up
Engine Room
Totally Redone 2021 / 2022. (See 'RECENT UPGRADES')
Twin CAT C12.9 / 1660HP / 300 hrs ZF 400A 1.59/1 gears, new risers and surge tubes
Panda Fischer generator with Sound Cover and electronic remote start
Optimus steering system ('24)
(3) Cruisair AC units
Ruud 20 gal hot water heater
New Batteries 2022 /wiring / in line breakers /switches
Charles 40A battery charger
Led Lighting
Stingray FW pump
Jabsco RW pump
New 125 gal fresh water tank inside pump shelf with integral battery boxes
(2) sets of propellers
Deck and Fishing
Fresh Bottom paint, propspeed on all running gear and trim tabs, zincs, hull polish and detail (April 2024)
Cutless bearings 2021
Cockpit, house, bowdeck and bridge painted '21/'22
Cockpit boxes at forward bulkhead, large ice box with custom inlaid bait tray to port, deep bulk ice storage and drink box to starboard, all painted inside with raptor liner and with gas shocks
Cabinet door to storage and remote stops for engines as well as second station electronic controls
(4) swing out drawer storage cabinet in cockpit chest
Center forward hinged hatch to quick access daily storage and generator access
Gaff lockers with port and starboard 50A service, gaff and brush holders, RW/FW removeable hoses and connections, fresh water fill, 12V dredge reel outlets, 12V bottom reel outlets
Large trim tabs
Teak deck and cover boards with hawse pipes
8 rod holders in cover boards and 6 tower leg holders
Large in deck fish / storage box
Lazz access hatch
Custom hardtop frame, hardtop, curtains, Rupp riggers, center rigger, quick disconnects, lighting '21/'22
Rupp triple hal-lock system on halyards through cover boards
Varnished teak toe rail, drip molding, salon doors and trim, helm pod and anchor pulpit
Forward cleats, breast cleats and chafing strips
XL Tuna door
New ceiling under overhang with inlaid lighting and speakers '21/'22
Fusion radio in cockpit
Bridge / Electronics
Center console layout with unique wraparound seating and storage with cushions
Storage in forward brow
Fusion speakers fwd, overhead lighting, flat paint finish under hardtop
Pancake teaser reels
Bluewater teak ladderback helm chair with second chair base mount
Custom console with flush mount electronics, helm pod with large CAT computer screen display, fusion radio and single lever controls
Sidebox built in console with ZF control display, 2 VHF radios, Optimus steering display and switch panel for ignitions, controls and low idle
2 USB charging ports and 12V spotlight plug
Rupp Outriggers with quick disconnects
Center rigger
(2) 16" Furuno Flatscreen multi-function displays
Chirp transducer
12V subpanel for bridge electronics and lighting
9 rod holders in belly band
Large Ritchie compass with SS cover
Lumitec LED spreader lights aft and Light Bar forward lip of hardtop
Contact
For more information about this yacht, please contact Jeff James We look forward to working with you!
For more information about this yacht, please contact Jeff James. We look forward to working with you!
For more information about this yacht, please contact Jeff James.