Full Specifications

Accommodations

(described moving from bow to stern)

V-berth forward sleeps two; storage shelf around entire berth; two storage drawers and lockers

Head with vanity and shower; multiple storage spots; pressurized water and manual foot pump

Hanging locker

Salon with port settee extends to double berth, starboard settee single berth; storage and shelves above and below both settees; drop down table and magazine rack

Navigation station starboard with chart table; storage under table and in cabinet

Galley port with double sink and pressurized water and manual foot pump; propane oven and two burner cook top; extended counter space and storage; large refrigerator/ice box with Nova Kool 2016

Aft quarter-berth sleeps two; storage shelf the length of berth

Cockpit personal shower with hot and cold water

Electronics- See Barkers Island Marina Refit Summaries Below for significant upgrades

In addition:

Raymarine EV-200 Sail complete - sensor core, actuator control unit, control head p70, drive unit (spare drive unit available as back up)

Bose speakers with Sony CD/radio and remote control

Electrical - see Barkers Island Marina Refit Summaries Below for significant upgrades

In addition:

Replaced voltage regulator 2018

New Xantrex Inverter 2021

Rigging summary

Spinnaker tack line led aft.

Two jib halyards and two spinnaker halyards at mast

Two sets of spinnaker sheets

Adjustable jib cars led aft

Mainsheet, mechanical boom vang, and outhaul led aft

Two line reefing system for first and second reef led aft

Harken backstay adjuster

Spare jib furler line

Spare spinnaker furler line

Variolous spare lines and sheets

UK Lazy Cradle main sail handling system

Mast mounted whisker pole

Jib and spinnaker winches

Sails

UK Tape Drive Silver Battmain with two reef points and tapered battens 2014

UK Tape Drive Silver 135% Passagemaker II Genoa 2015

Al VMG Spinnaker with sock 2015 and Harken Reflex torsion cable

A2 Running Spinnaker with sock 2015 and Harken Reflex torsion cable

North Sails "Al .5 recut closer to A3" with sock and Harken Reflex torsion cable

North Sails Marathon Series 200 #1 Headsail (lightly used)

85% Jib: Haarstick Dacron (never used)

Retired main sail spare

 ATN 100 sq ft Gale Sail (never used)

Harken Top-Down spinnaker furler and starboard spinnaker halyard added 2017

Installed self-tailing main halyard winch on cabin top 2015

ATN Tacker for gibing asymmetrical spinnakers

Deck General

Ship compass replaced 2023

Six fenders

Assorted dock lines

Periodically rebeded chainplates and deck fittings

Cockpit table

Windlass and bow roller for anchor

On boat-Fortress with 20' chain and 200' nylon rode

33# Bruce with 20' chain and 200' nylon rode

20# CQR with chain lead and 140' nylon

Spare rode with 125' chain and 200' nylon

Engine

Westerbeke 30B Three with spares kit; spare alternator belts

Professionally maintained - changed oil, oil filter, primary and secondary fuel filters, impeller annually; lubricated feathering MaxProp propeller annually

Replaced water injected exhaust elbow 2017

Replaced key switch and starter alarm 2023

Additional

Custom cradle with cradle pad rebuilt 2025

Professionally maintained - waxing, bottom paint, grease thru hulls, bright work, anodes

Professionally winterized and commissioned each season

Replaced propane regulator, gauge, and hoses 2017

Refrigeration unit new 2016

Rudder tube repair 2015

Other equipment

Lifesling and added lifting tackle system

SOLAS grade flare kit

Ditch bag

EPIRB

Electric and pyro flares

First aid kit

Water purification

Hom and signaling mirror

Search light

Handheld VHF radio

Sabre tool drawer and misc tools

Multi-meter

120 V space heater

First aid kit

Autopilot spare drive unit

Lake Superior chart book

Two radar reflectors

Misc navigation tools

Two boat hooks

Battery operated emergency navigation lights

Emergency VHF antenna

Port screens for bugs

Bolt cutter

Misc sail ties and bungees

Sail repair kit and misc spares

Loos tension gauge

Life jackets - five (not inflatable)

Fire extinguishers - four

Jacklines

Barometer

Shop's bell

Kitchen utensils, plates, and bowls

Misc pots and pans

Air horn and mast mounted electric hailer

Throw rope Forespare TruPlug (two) and wooden boat plugs

Manual and electice bilge

Winch handles - five

Spinnaker turning blocks

Snatch block

Refit 2012-2013

Replaced alternator

Changed primary and secondary fuel filters.

Replaced aft motor mounts and aligned engine.

Tightened “everything” - Checked all hoses and tightened all clamps. Checked all wire connections, throttle controls and connections, shift cable control linkage and connections, etc. 

New exhaust hose.

Visually inspected all standing rigging. 

Rebeded stanchions at two lifeline gates (four) and cover plates for chainplates (eight).

Tightened keel bolts.

Cleaned and greased all five winches.

Greased and adjusted all thru hulls. Tightened all hose clamps ensuring two per thru hull, checked hoses.

Greased and adjusted Max prop.  

Sanded and sealed edges of removable floor boards.

Replace rudder packing and adjust. Fill grease cups. Inspected all steering components. Checked lower rudder bearing. 

Installed Harken 32mm with 4:1 purchase on traveller.

New Rollar Furling Harken MKIV Unit 1.

New headstay.

X10 P70 Sail Pilot, Edson Bronze tiller arm independent of quadrant. Existing autopilot left as backup.

Added padeyes and cleats for UK Lazy Cradle.

Added one more halyard cleat to stbd and two to port sides of mast. 

Ran spare main halyard and spinnaker halyard. 

Added mast step for ease of access. 

New LED anchor light and new masthead/steaming light.

Forespar LC 12-22 aluminum. Mast mounted with track, car, and line to adjust and fix pole height. Using spare jib halyard as topping lift. 

Deck Organaisors Installed four line (port) and three line (stbd) with low friction. 

Installed dual circuit plus battery switch and ACR relay.

Install three #31 and one #27 Blue Optima batteries.

Upgraded to Balmar alternator and regulator

Link Pro Battery monitor

e95 with Platinum Navionics charts on stbd cockpit bulkhead and a65 at nav station.

RD418HD 18” HD Radome mast mount.

AIS 650 transmit and receive.

Sirius SR6 weather receiver including XM music.

ICOM M504A VHF DSC. New VHF cable from masthead. Hailer for fog.

i60 analog wind display with new cable and wand.  

i70 Multi function instrument

Sony AM/FM Stereo

Widen port setee and put on rollers.

Upgraded to Raritan PH II, replaced all hoses and holding tank.

Fixed hatch slide so it doesn’t come all the way out.

Rebuild windlass motor and cleaned all switches and connections.

Refit 2013-2014

Steering Inspected and greased entire system; filled grease pots and checked/greased rudder bearings

Maxprop Greased

Engine Detailed engine; changed oil

Companion way Varnished

Winches Upgraded primary winches, relocated existing winches for spinnaker

Back stay adjuster Installed Harken

Adjustable jib cars Added Garhauer (E7 G2-UB with SJ2 Swivel Jammer)

Stbd cabin top rope clutch

Replaced triple Jam cleat – port side of mast

Added jam cleat for spinnaker

Anchor New swivel shackle to rode

Mast step Removed rot, rebuilt support and mast step, refinished floor

Deck joint Repaired and resealed deck joint

Deck leaks Replaced Dorades and rebuilt boxes, sealed hatches, sealed mast collar

Anchor locker Rebuilt anchor locker and windlass

Water heater Replaced heating element

Stbd traveler cam cleat Replaced all cabin top cam cleats

Dodger

Replaced glass; installed all new dodger snaps

Plotters

Performed software upgrades

Propane

New valve and regulator

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.