HULL AND DECK STRUCTURE

• Infusion Molded (SCRIMP) GRP hull with biaxial and unidirectional E-glass reinforcing fabrics, end grain balsa core and vinylester resin gelcoat reinforcing layer  
• Keel floors, keel sump, engine bed, mast step and longitudinal stringers are integrally molded with the hull during the SCRIMP process 
• Resin infused (SCRIMP) GRP deck with biaxial reinforcing fabrics and end grain balsa core 
• White gelcoat deck with molded beige nonskid 
• Flange type deck/hull joint bonded with Plexus MA550 adhesive (ABS approved) 
• Fin keel with integral lead bulb for low center of gravity, bolted to molded keel sump with 1" diameter 304 grade stainless steel bolts 
• Marine grade plywood structural bulkheads bonded to hull and deck  
• Stainless steel headstay tang integral with stemhead fitting 
• Stainless steel main chainplates thru-bolted to interior structure  
• Stainless steel rudder shaft with composite balanced elliptical rudder and low maintenance self-aligning bearings 

DECK AND COCKPIT DETAILS

• (2) Lewmar deck hatches over forward cabin and head 
• (4) Stainless steel oval portlights 
• Custom stainless steel stemhead fitting 
• Full length varnished teak toe rail 
• Varnished teak handrails, nosing, cockpit coaming and trim 
• (4) 10" Stainless mooring cleats 
• (2) 8" Stainless steel midship springline cleats 
• Companionway sliding hatch with seahood and washboards 
• Molded port/starboard cockpit hatches and aft lazarette hatch 
• Teak cockpit sole 
• (2) Harken 46 two-speed electric winches at helm with multiple jammers for all sailing functions 
• All halyards, sheets, reefing lines and traveler control lines are lead below deck to helm winches for easy operation 
• Dedicated rope storage cubbies under each winch to keep things tidy 
• Harken 6:1 Mainsheet traveler track with control lines at helm 
• Edson pedestal steering with 34" stainless steel wheel finished with varnished teak rim 
• Ritchie binnacle-mounted compass 
• Self-draining cockpit with port and starboard drains 
• Full length cockpit seats with cushions 
• Removable varnished teal cockpit table 
• Dodger (beige) with roll-up front  
• Deck fills for fuel and water tanks 
• Holding tank pump out deck plate 

MAST, RIGGING AND SAILS

• Hall Spars double-spreader carbon mast  
• Forespar Leisure furl mainsail boom system (2019) 
• "Moondust" Awlgrip finish on boom and mast 
• Hoyt jib boom by Hall Spars 
• Harken jib furler 
• Navtec continuous Nitronic 50 rod rigging 
• Steaming and masthead anchor lights 
• Forespar "Quik Vang" boom vang, Moondust finish 
• North NorDac full batten furling mainsail (2019) 
• North Norlam jib  

INTERIOR

Interior Decor 

• Removable plywood/vinyl overhead panels with teak trim 
• Teak hull ceilings in main cabin 
• Formica plywood bulkheads with teak trim 
• Formica locker interiors/bunk tops and shelves 
• Laminated teak door frames 
• Solid teak doors with plywood panels 
• Varnished teak and holly cabin sole 
• Interior cushions for V-berth, settees and backrests  

Forward Cabin 

• V-berth with storage under berth 
• Deck hatch 
• 4" Laminated foam cushions 
• Overhead light 
• Vinyl head liner 

Main Cabin 

• Full length settees port and starboard 
• Shelves outboard of settees 
• Electrical panel on port side settee 
• Teak bi-fold doors opening into forward cabin 

Galley 

• Storage lockers outboard 
• Origo alcohol stove 
• Isotherm DI 40 DC refrigerator (top loading) 
• Formica counter tops 
• Stainless steel sink 

Head Compartment 

• White molded GRP pan 
• Raritan PHII marine toilet with Y-valve and drop-down teak seat cover 
• Stainless steel sink 
• Storage lockers outboard 
• Locker under vanity 
• Mirror 
• Deck hatch 

ELECTRICAL

• 12 Volt DC system designed to ABYC 
• All wiring is tinned copper to inhibit corrosion and is coded for ease of identification 
• DC master panel with analog meter and magnetic circuit breakers 
• Battery switch 
• (2) 4D gel cell batteries 
• Battery charger 
• 110 volt shore power inlet with 30 amp shore cord 
• (4) Halogen reading lights 
• Overhead lighting in galley and head 
• Running lights mounted at stemhead 
• Stern light mounted on aft deck 
• Garmin 9” chartplotter (2019) 
• Garmin autopilot (2019) 
• Tick Tack sailing instruments 

MECHANICAL

• 20 HP Yanmar 3YM20C engine with sail drive and waterlock muffler 
• 2-Blade folding propeller 
• GRP engine bed and oil pan 
• Single lever engine control with neutral safety switch 
• 18 US Gallon polypropylene fuel tank 
• 16 US Gallon PVC freshwater tank 
• 11 US Gallon PVC holding tank 

ADDITIONAL

• Fortress anchor with rode and chain 
• (5) Life jackets 
• (2) Harken winch handles 
• 48" Teak ensign staff 
• Cockpit cover 
• (3) Fenders and docklines 
• Owner's manual 
• Equipment manuals (Owner’s manuals for builder-installed equipment, pumps, winches etc.) 

EXCLUSIONS

• The owner’s personal effects are excluded from the sale. 

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.