Please ensure Javascript is enabled for purposes of accessibility

1990 Sabre 34' 10.36 m 34-2 Targa - AQUILA


$ 55,900 USD

1990 Sabre 34 Targa features the optional WING KEEL for an islands cruising draft of 4'6"!

PDF
Vessel ID# 2811422 Last Updated: 04-11-2024 14:10:43

Description

The AQUILA is a 1990 model Sabre 34-2 Targa with the Wing Keel option with a draft of 4'6". This model was produced by SABRE YACHTS of South Casco, ME from 1988 through to 1991. The last production hull number was "430" with the AQUILA being number "402". Earlier versions were known as the "SABRE 34 Mk II Aft-Cabin".

The AQUILA has been owned by her present Owners for the past 25 years. She's been locally stored & maintained & operated in our Stamford, CT area during their tenure of ownership. The AQUILA has been well-maintained over the years and upgraded as well as a review of the Listing will certainly indicate. Given the market popularity for the SABRE 34-2 as demonstrated over the years, and the overall condition of the AQUILA, it's highly-recommended not to delay in moving forward with this fine example of a popular sailing yacht. The AQUILA has such desirable upgrades as propane vis CNG for the stove, a MACK PACK to manage the mainsail, a MAXWELL electric anchor windlass, a dodger & Bimini, upgraded GARMIN electronics to include radar .. "and more".


New Listing!

Randy Altemus

Professional Yacht Broker

New England RI USA

1-203-512-0847


Specifications

LOA: 34' (10.36 Meters)

Type: Sail- Used

Year: 1990

Beam: 11' 2''

LWL: 28' 3''

Draft Max: 4' 6''

Draft Min: 4' 6''

Cabins: 2

Heads: 1

Maximum Speed: 7 Knots

Cruise Speed: 6 Knots

Fuel Type: Diesel

Hull Material: Fiberglass

Bridge Clearance: 50'

Fuel Tank: 25 Gallons (94.64 Liters)

Fresh Water: 76 Gallons (287.69 Liters)

Holding Tank: 20 Gallons (75.71 Liters)

Displacement: 11500 lbs

Photos

Engines

Engine 1

  • Engine Make: Westerbeke
  • Engine Model: 30 B-3
  • Engine Type: Inboard
  • Drive Type: Direct
  • Power HP: 27.00
  • Power KW: 20.13
  • Fuel Type: Diesel

Full Details

Vessel Walkthrough

Hull and Deck

Hull

 The SABRE 34-2 is constructed with a hand laid-up fiberglass hull. The yacht has a Balsa Core for strength, insulation and reductions of weight. The AQUILA had a full "Bottom Job" in 2013 that included the bottom stripping along with Epoxy Barrier Coatings. 

  • WHITE Gelcoat finish
  • Cove stripe, DARK BLUE w/ SABRE Logo
  • SABRE Double Boot-tops, DARK BLUE
  • Bottom paint, HYDROCOATE BLUE (note: sanded & painted, 2023) 
  • Full Bottom Job (2013) 
  • Fin Keel (draft: 6')
  • Lead Keel
  • Spade rudder

Deck

  • WHITE Gelcoat Finish
  • Contrasting non-skid surfaces
  • Cored deck construction
  • Recessed Anchor well
  • Anchor sprit w/ double rollers, cast aluminum
  • Protective deck plate, stainless steel, for the Anchor Rode
  • Teak Toe Rails
  • Teak Cabin Top Grab / Safety Rails
  • Bow Pulpit, double-rail, stainless steel
  • Double Life-Lines w/ Stanchions, stainless steel
  • Gates, port & starboard
  • Stern Pulpit, double-rail, stainless steel w/ Gate
  • (4) Dorade Deck Ventilators
  • (2) Bomar Deck hatches, opening
  • (10) Bomar Opening ports
  • (4) Portlights, fixed

Cockpit & Helm Station

The SABRE 34-2 Cockpit gets high marks for the very good visibility, generous size & great comfort that is supplies by design.

  • EDSON Wheel Steering
  • Wheel w/ Elkhide wrap
  • Binnacle guard, stainless steel
  • Engine Controls, dual lever throttle & shift, mounted on the Binnacle 
  • Companionway Entrance w/ large sliding PLEXI hatch
  • Teak Companionway boards
  • Cockpit Seat Lockers; (1) Propane, (1) Lazarette, (2) Storage (starboard is "deep" & port is "shallow" for winch handles & lines)

Rig, Rigging. Winches & Sails

Rig & Rigging

 The SABRE 34-2 has a WHITE-painted aluminum mast & boom. The has double-spreaders and is keel-stepped. The halyards are internal. The shrouds have the traditional main-forward & aft lowers configuration to (3) separate chain plates. 

  • SEA-FURL Roller Furling by HOOD YACHT SYSTEMS for the headsail
  • Internal halyards
  • Standing Rigging, 1x19 stainless steel 
  • Running rigging: main & jib / genoa halyards, boom topping lift, boom vang, genoa sheets, car adjustment lines, mainsheet, roller-furling line, Traveler cross-haul lines
  • Shrouds have plastic rollers for lower sections
  • Boom Vang, block & tackle
  • STRONG Sail Track & Slide System by ULTRA MARINE
  • MACK PACK Mainsail Management System (note: by MACK SAILS & features integrated mainsail cover and Lazy-Jacks) 
  • Genoa tracks, inboard & outboard (note: latter mounted on teak toe rails)
  • Genoa cars, port & starboard on tracks
  • Inboard genoa sheet cars adjustable w/ block & tackle
  • Mainsheet Traveler w/ cross-hauls (note: mounted on Coachroof just forward of the Companionway)
  • Halyards & lines are led aft to service winches mounted on the Coachroof aft, port & starboard
  • Line organizers & clutches 
  • Line turning blocks aft, fixed

Winches (LEWMAR)

  • (2) L-43 CST (Chrome Self-Tailing) 92) speed Primary Jib / Genoa
  • (2) L-30 CST (2) speed Halyard / Service
  • (2) L-16 C Service 

Sails

  • Mainsail w/ Full Battens, Dacron (2004) w/ MACK PACK System
  • Genoa, 135%, Dacron (2016)
  • SUNBELLA Genoa Tabling Cover, DARK BLUE (new cover, 2022)

Accommodations

The SABRE 34-2 was produced with the standard SABRE YACHTS varnished teak interior joinery. The overall level of finish, the storage capacity and access for same is certainly well above-average for a production yacht of this era. 

 The Interior Layout is comprised of a (2) Stateroom layout. The classic "V-Berth" is forward and the the Aft Cabin entrance is located on the port side & aft. The Head is located to starboard of the Companionway and the Galley is to port with the Nav Station opposite to starboard. There is a "L" Settee in the Salon to port and a single Settee opposite to starboard. Proceeding to the Fore Cabin, there's a large hanging locker to starboard and a "wash-up" basic facility opposite and to port. 

  • Interior teak joinery, varnished
  • Teak & Holly Cabin Sole throughout
  • Access panels in the Sole

Salon

  • Headroom: 6'3"
  • "L" shaped Settee to port w/ table
  • Single Settee to starboard 

Galley

The Galley for the SABRE 34-2 is located on the starboard side & aft.

  • REGAL Stove & Oven, (2 Burners, propane w/ (1) 10# aluminum tank, gimbaled
  • Safety bar, Stainless Steel
  • Marinetics Electric remote propane gas shut-off switch
  • Extra propane tank, 10#, aluminum
  • ADLER-BARBOUR Refrigeration, 12VDC
  • Double sinks, stainless steel
  • Hot & cold pressure water service
  • Foot pump for fresh water
  • Wood cutting board & cover for stove top

Head

The Head for the SABRE 34-2 is located on the starboard side, aft at the Companionway.

  • Holding Tank Capacity: 20 USG (note: plastic tank)
  • RARITAN Marine Head MSD, manual-flush (note: new, 2014)
  • Fiberglass surround area w/ integral Vanity w/ sink
  • Shower, hand-held unit
  • Opening port
  • Large dressing mirror

Nav Station

The SABRE 34-2 Aft Cabin model has the forward-facing Nav Station located in the Salon, starboard side aft.

  • BASS Electrical Panels for the DC & AC functions
  • VHF
  • GARMIN 3205 Display
  • Navigator’s flex-light
  • Storage drawers underneath

Current Electronics

The majority of the GARMIN Electronics were added "new" in 2013. 

Communication

  • VHF: STANDARD Horizon Explorer

Navigation

  • GARMIN Depth-Sounder
  • GARMIN GPSmap Model 4208 
  • GARMIN 3205 Radar 
  • RITCHIE Binnacle Compass (note: rebuilt, 2023) 

Performance

  • GARMIN GWS10 Wind AWI / WS
  • GARMIN Knotmeter 

Autopilot

  • RAYMARINE Wheel-Drive (note: external mount) 
  • Remote for A/P

Entertainment

  • SONY AM / FM / Cassette Stereo XR-U330
  • (4) Speakers for Interior & Cockpit

Current Systems

Electrical  

  • BASS Electrical panel for DC / AC functions
  • Battery Condition Indicator, 12VDC
  • Line Voltage Indicator, 110VAC
  • XANTREX LinkLite Battery Panel, 12VDC

Plumbing

  • Fresh Water Capacity: (76) USG in (2) tanks (plastic) 
  • Hot Water Heater, (6) USG (note: heat from Engine & Shore Power) 
  • Sea-water washdown, salt water (note: located forward) 
  • Bilge Pumps: (1) Cockpit manual & (1) electric / automatic below
  • Exterior shower 
  • Shower sump pump
  • Pressure fresh water pump for service to the Galley, Head & Shower, Cockpit Shower & Fore Cabin sink
  • Forward Cabin "wash up" area w/ stainless sink & hold & cold pressure water service

Lighting, Exterior

  • Nav lights
  • Mast light
  • Foredeck light

Lighting, Interior

  • (5) Reading lights
  • (8) Overhead dome lights
  • Nav Station light

Propulsion

This SABRE 34-2 Targa is powered by the standard WESTERBEKE Model 30 B-3 FWC (3) cylinder marine diesel that is rated at 27 SHP at 3600 RPM's.

  • Engine Hours: 1972 (note: as of November, 2023)
  • Fuel Capacity: 20 USG (note: aluminum tank)
  • (2) RACOR Fuel Filter / Water Separators, R12 T
  • Propeller: (2) Blade, bronze
  • Propeller Shaft, 1", stainless steel 
  • Transmission: HURTH 1.5:1 Straight Drive
  • Engine Alternator, 55 AH


Inventory, Additional

Ground Tackle

  • MAXWELL Electric Windlass w/ corded Remote Control (2011) 
  • Anchor, FORTRESS FX-37
  • Rode: 125'x1/2" (3) strand Nylon w/ 5/16"x20' chain

Canvas (Dark Blue SUNBRELLA)

  • Dodger Note: new / replacement EISENGLASS sections, 2016)
  • Bimini
  • Binnacle & Wheel Cover

Safety

  • (2) Fire Extinguishers
  • (5) PFD's, Type II
  • LIFESLING Man Overboard Devise
  • Carbon Monoxide Detector
  • Emergency Tiller
  • Swim ladder, (4) steps w/ teak treads, folding (note: mounted on Transom) 

Misc

  • (3) Fenders
  • (4) Dock lines
  • Cockpit Seat Cushions
  • WINDEX Spar-Fly
  • Screens for hatches
  • Boat hook
  • Propane grill
  • Teak Cockpit Table, folding & drink holder
  • Outboard motor bracket
  • GARHAUER Outboard motor davit, stainless steel (note: Transom-mount) 
  • Radar mast, transom-mounted


Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Randy Altemus

For more information about this yacht please contact Randy Altemus
We look forward to working with you!

Randy Altemus

Professional Yacht Broker

New England RI USA

1-203-512-0847


Similar Yachts For Sale

Based on price range and size you may be interested in these yachts/catamarans. The following options are examples and if you would like to see more similar yachts/catamarans please click below.

37 ft Dickerson 1983 37 Moondancer North Kingstown Rhode Island United States 57900
North Kingstown, RI, US
57,900 USD ( 59,900 )

Brokered By

Brewer Yacht Sales
37 ft Tartan 1982 37 CB KE HOLO Melbourne Florida United States 50000
Melbourne, FL, US
50,000 USD

Brokered By

Edwards Yacht Sales
37 ft J Boats 1988 BANZAI Eliot Maine United States 50000
Eliot, ME, US
50,000 USD

Brokered By

Merri-Mar Yacht Basin
Compare Yachts