Custom
Custom
Thank you for signup please verify your email address, we have sent an email.
$ 12,722 USD
Flag of Registry: Canada PDF
This unusual Custom Cutter, with her steel deck and hull, is approximately 65 % complete, hence her bargain-like price. She appears that she may be based on a Lyle Hess design. Most of his designs were manufactured in wood or fibreglass. It is unusual to find one manufactured from metal.
We want to be very clear that this is a serious project boat that will need a large amount of work. One should approach this project with the expectation that it is only the shell, the standing rigging and the three sails are available. Please count on doing everything else. The good news is that the engine and prop shaft will be reinstalled by the marina at no charge.
Local knowledge says that she was manufactured by a professional welder in Iowa in 2003. The original engine was a 12 hp Yanmar which was much too small to move her at a significant pace. The current owner replaced that engine with a 25 hp Universal (Kubota) diesel. At this point, her hull is uninsulated and she is stripped out down below. Her framing is 1/4" x 2 1/2" steel on 18" centers. Her hull plating is the same thickness below the waterline and likely 3/16" above the waterline. She has been recently ground-coated with submarine primer and then topcoated. Her ballast is concrete encased in a steel-framed keel. She has a full keel and has a hard double-chine in her hull design. Her sails (new in 2003) are hanked on.
With some love and attention, she could be equipped for and capable of cruising.
491 1000 Island Parkway
Lansdowne ON K0E 1L0 Canada
In Stock: Yes
LOA: 39' 3'' (11.96 Meters)
Type: Sail- Used
Year: 2003
Beam: 10'
Draft Max: 4' 9''
Cabins: 1
Head Room: 5' 9''
Fuel Type: Diesel
Hull Material: Steel
Hull Shape: Monohull
Fuel Tank: 24 Gallons (90.85 Liters)
Fresh Water: 60 Gallons (227.12 Liters)
Displacement: 16000 lbs
General Equipment
Anchor: Bruce
Anchor Chain: 275′
Anchor Windlass: Manual
Battery Charger
Battery Parallel Switch
Bilge Pump – Manual: 1
Bilge Pump – Electric: 1
Boarding Ladder
Bow Rail
Bow Roller
Fenders: 4
Head 1: Manual
Pressured Water
Screens: Hatches & Ports
Shore Power Inlets: 1
Shore Power Amps: 50
Shore Power Cord Length: 35′
Washdown Pump: Sea Water
Electronics
Compass: 1 Ritchie
Depth Sounder: 1 Hummingbird
GPS: 1 Garmin
VHF: 1 Uniden
Sails & Rigging
Main: Standard Battens
Headsail 1
Other Sail: Staysail
Boom Vang
Rigging: Wire
Sail Cover – Main
Traveller
Winches – Standard: 2
Winches – Self Tailing: 2
Winch Handles: 1
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
For more information about this yacht please contact Grant and Patricia Bowlby
We look forward to working with you!
491 1000 Island Parkway
Lansdowne ON K0E 1L0 Canada