Additional

BOAT CANVAS

Blue Sunbrella Dodger and Bimini

Covers for winches and windlass

Cockpit cushion for both main and aft cockpits

Awnings and hardware for both cockpits

Sun shelter for at mooring

SPARS AND RIGGING

Deck stepped masts on solid fibreglass 

Isomat tapered mast(57ft)

Isomat boom and fittings

Isomat tapered mizzon mast and boom(36ft)

DYEFORM stainless steel standing rigging with NORSEMAN turnbuckles

HATCHES AND PORTS

3X Atkinson & Hoyle 24X24 opening hatches

1X roller Bomar hatch in main companionway

1X roller Bomar hatch in aft companionway 

4X Vetus port lights in topsides

2X Bomar opening hatches in cockpit and 1 each in heavy duty companionway drop boards

VENTS

2X cowl vents

4X NICROFICO day and night solar vents.

TOERAIL

Heavy duty Goyot toerail with custom fittings and stanchion bases

PULPIT, STERNRAIL AND STANCHIONS

Rails are custom heavy wall 360 stainless steal and tig welded in place to fit sockets in toerail(30”)

SAILS AND COVERS

North Sail Dacron full batten in zippered Sunbrellas cover with lazy jacks. BR logo.

North Sail Dacron mizzen sail in zippered Sunbrella cover with lazy jacks

North Sail genoa with profurl furling system

North Sail staysail( self tacking)

North Sail storm sail for main mast

ANCHORS AND WINDLASS

Working 75lbs CQR plough on bow fitting

Danforth anchor 105lbs

Danforth anchor 75lbs

3/8 high tensile chain

Chain locker

LUMAR electric windlass for both chain and rode.

WINCHES

Stainless steel Anderson self tailing winches

GIBB self tailing sheet winches

NAVIGATION STATION

Full size chart table with bookshelves and lockers

Adjustable swivel chair

Electrical panels with breakers and monitors, controls for Invertor/Charger

Ratheon radar

Icom VHF

Icom HF radio

Autohelm autopilot

Tank tenders for 3X fuel tanks, 2X water tanks and 1X holding tank

WOODWORK

All cabinets and seat fronts, etc, are teak and teak plywood. 

Cabin sole is custom made from wide teak strips and narrow holly wood glues to a plywood base and varnished for a traditional look.

Interior deck beams are Afromosia for strength.

Bulkheads are 3/4 ply covered within the cabin spaces with thick textured vinyl commercial wall covering to ad brightness in the cabins.

All seats, tables and counter tops have fiddles(removable on the saloon table)

The 6 cabin doors are fitted with round cornered frames into bulkheads and 2 frames of louvers for ventilation. All are fitted with lift off hinges and lockable with PERKO hardware

Machinery accesses are painted for easier cleaning.

The engine room has 3 accesses and is lined throughout with 1” lead-lines soundproofing.(main cockpit has a removable pan and helm seat to allow engine removal)

STEERING SYSTEM

Pair of cables from centre cockpit pedistal steering to quadrant on rudder shaft. Cables run over sheeves and in conduits to prevent water entry.

Skeg mounted rudder

AUTOHELM auto pilot using compass or wind direction. Controls in cockpit, nav station and and foredeck.

Emergency steering system in aft cockpit.

HELM ELECTRONICS

Compass

Ratheon radar

Raymarine wind, speed and depth

Autohelm autopilot

NAVIGATION LIGHTS

Navigation lights mounted on pulpit and stern(AQUASIGNAL)

AQUAMARINE trilight on mast and 1 on front of mast

4X deck lights, 2 under main mast spreader and 2 under mizzen mast spreaders

GALLEY/SALOON/AFT CABIN

SHIPMATE stainless steel gimballed propane stove with oven

Microwave/convection oven

Taylor SS diesel bulkhead heater

Dickenson SS diesel cabin heater

SAFETY EQUIPMENT

EPIRB

Overboard marker pole with flag

Lifesling

Life ring, 2X horseshoe life preservers with lights, 1X throw line

Fire extinguishers

Fire blanket

Alarm system(wired in)

Strobe light on mizzen mast

Jack lines(P&S)

Life jackets

Stainless steel folding boarding ladder(teak steps) for P or S use.

Boat hook

Misc spare parts and fittings