Overview

The 2018 37’ Winter Custom Yachts, known as W 26 by the factory, is one of the most beautiful center console vessels in the world. Her proven North Carolina hull form provides a smooth, dry ride and is propelled by triple Mercury Verado 350s. A SeaKeeper 3 keeps this fishing platform steady. Although she’s designed as a tournament winner, she’s also a head-turning cocktail cruiser. A custom tow eye is accompanied by a solar panel and tracking device when she’s pulled behind a yacht. Contact us to schedule a time to see this work of art. 

Key Features

• Pedigree sea-keeping design and build quality by Winter Custom Yachts

• SeaKeeper 3 stabilization

• Triple Mercury Verado 350s

• Fish-ready

• Tow-ready

• Although lift-kept, new bottom paint and waterline-up polish (March 2024)

• Upgraded steering pumps

Construction

• All bilges, engine room and equipment faired and painted with Alexseal Cloud White

• Walkaround construction

• Layer 1” Diab A500 foam on cabin

• Layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

Console

• Centerline helm with helm pod

• Glove box with USB charging outlets

• (4) Molded in drink holders

• (2) Simrad NSO 19" touchscreen displays

• Simrad OP50 controller

• Simrad Open-Array radar

• Simrad NAC-2 autopilot

• Ritchie 6" Super sport compass mount

• Navico 3D Structural scan with forward scan transducer

• Wave Marine WIFI module

• Simrad VHF

• NAIS 500 NAIS signal module

• ACR spotlight controller

• FLIR MD625 fixed thermal imaging camera

• Fusion MS-NRX300 with JL Audio speakers and amps

• 20” Rigid Spot style LED light bar

• Mercury Smartcraft gauges

• Drink holders in console at helm

• Glove box with USB charging outlet

• C Zone display to control systems

• Molded footrest

• Release Marine chairs with flip up bolsters

• Barro ultra leather fabric

• Molded in curtain track on console

Mechanical Equipment

• Triple Mercury Verado 350 HP Outboards with up-to-date service

• Mercury gauges and controls

• Mercury power steering recently changed with upgraded pumps

• Mercury fuel filters

• Side Power SE 80 12 VDC Bow Thruster

• SeaKeeper 3 gyro stabilizer

• Jabsco saltwater pump

• Jabsco Blaster freshwater pump

• (4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch

• (2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch

• Rule sump boxes

• FRP discharges on hull sides

• Dometic freshwater flush head with 15 gallon holding tank

• Livorsi 1150 high speed trim tabs

• New batteries

Tankage

• 525 gallon fuel capacity in cockpit

• 50 gallon fresh water tank

• 15 gallon hot water heater

Electrical Equipment

• (2) Newmar 60-amp battery charger 12-volt, (3) bank

• C-Zone control system on all DC systems

• Custom Paneltronics panels

• 120-volt AC, 24-volt DC

• 30-amp, 240-volt AC service

• 12-volt DC lighting throughout

• All wiring guided by ABYC standards

• (2) 803 TIX Lumishore underwater lights in transom

Deck

• Forward bow seating with storage within

• (6) 15-degree rod holders in bow cap

• (4) 8” pull up cleats on top deck

• Faux teak toe rail with chafe gear

• Custom removable bow pulpit and gear

• RC-5 low profile windlass

• MaxSet 8 polished SS plow anchor

• Genuine teak decking

• Radiused gunnel faces

• Dive tank storage under love seat

• (2) Fuel fills on side gunnels

• Water fill on side gunnels

• Waste access on gunnels

• Full pass-through side door with gate

Tower

• Palm Beach Towers hard top

• Custom molded hardtop with polished aluminum frame T-top style

• Upgraded hardtop to incorporate thicker 3” hardtop

• Radar Pod

• Molded aft single 12-volt LED Lumitec spreader light with molded pod

• Molded forward single 12-volt LED Lumitec spreader light with molded pod

• Molded navigation lights

• Recessed dome lights 12-volt, tri-color

• (6) Rod holders welded to aft side of hardtop

• Anchor light on mast

• Molded in “Pancake” Birdsall Marine teaser reels

• 20” Rigid Spot style LED light bar

• Rupp Revolution Top Gun outrigger bases

• Rupp HD carbon fiber poles 18’

• Rupp HD carbon fiber center rigger

• One piece acrylic curtain enclosure

Cockpit

• (6) 30 degree rod holders in cockpit

• (2) Hawse pipes on covering board top

• (2) 10” cleats mounted on side wall I cockpit

• Custom baitwell in transom

• Baitwells to feature laminated curved glass

• Genuine teak decking

• 26” freeboard from transom to bow

• Full pass-through transom door with gate

• Under gunnel accent lighting throughout

• Release Marine triple seat with flip-up bolster

• Concealed access to shore power and water spigots under gunnels

• (2) In-deck fish box (16” W x 14” D x 60” L)

• Dive ladder on transom

• Access to lazarette and gyro compartment

• Frigid Rigid cooler with slides

Tow Package

• Integrated solar panel charging system with monitoring capability

• WIFI network extender for connection to C-Zone up to 350’

• Custom SS towing eye

Interior

• Teak stair treads

• Quarter sawn teak interior

• Teak and maple flooring

• Cabinetry throughout interior with satin finish

• White painted surfaces

• Solid teak countertops

• Solid surface countertops with stainless steel undermount sink

• Jabsco freshwater flush head

• Satin Southco Mobella McCoy door handles

• Satin Southco push button latches

• Recessed Imtra Ventura LED lights with white bezel in overhead

• Access to all electronics and AC panel

• Oversized bilge pumps

• Warning beacon light on top of tower to indicate bilge pump operation

Exterior

• A buildup of Alexseal fairing products followed by Alexseal primer to a finished surface

• Topsides: Alexseal Cloud White

• Hull: Alexseal Stars and Stripes

• Boot Stripe: Alexseal Cloud White

• Bottom Paint: SeaHawk Cukote Black

• 1” solid stainless steel bumper metal

Hull Bottom

• (2) Layers ½” marine grade Okoume plywood

• Layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy

• Layers 1708 Vectorply biaxial fiberglass on keel and chine

• Layers 1708 Vectorply biaxial fiberglass inside bottom up through hull side

• Laminated Douglas Fir stringers

Hull Sides

• Hull side 2 layers 6mm Okoume plywood Loyds type 1088

• Layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

• Laminated Douglas Fir rib bands

• Laminated Douglas Fir chine

• Laminated Douglas Fir sheer clamp

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.